PP2000/Lexia-3 Citroen/Peugeot Diagnostic
Caution: Please don't try to disassemble the machine.No warranty if the machine is disassembled!
PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot!
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Supported functions Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool.Fly 100 Hondax431VCM IDSAuto DiagnosticAutomotive DiagnosticVAS 5054Avolvo vida dice
Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Main unit with extension OBD2 cable
Software CD for LEXIA-3 Version 45
Software CD for PP2000 Version 21.14
S.1279 Module for PPS2000 (optional-3530032)
30 PIN cable for Citreon Diagnostic Tool (optional -3530033)
GO TO YOUR COMPUTER'S CONTROL PANEL
1. Instruction for Installation and Activation for PP2000
2. SET THE AREA/LANGUAGE TO USA/ENGLISH
3. START THE INSTALLATION
4. Activate after installation. The Key Gun is included in the software
Lexia 3Nissan consult 3Benz StarRenault CAN Clipbenz star 2000Toyota tester
MVCI for TOYOTA HONDA VOLVO
MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.
Fully compatible with Toyota TIS, Honda HDS and VOLVO DIDA (New!!!)
Supports Diagnostics, Reprogramming, Active tests, and key programming
Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics
Fully compatible with SAE J2534
Programmable power supply
Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector
Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector
RGB status LEDs
K-Line ISO 9141
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
Diagnostic Interface: 16PIN
USB Interface : USB 2.0
Power: DC 5 V - 36V
Dimensions: 95mm(3.74″)L x 49mm(1.93″)W x 28mm(1.10″)H
Net Weight: 85g
Gross Weight: 193g
User Manual: Instructions on tool operations
Driver CD: Includes user manual, drivers, and etc.
OBD II cable: Communicates between tool and vehicle
USB cable: Communicates between tool and PC/Laptop
Carry case: A nylon case to store the tool when not in use
LAUNCH X-431Bmw GT1diagnostic tool auto diagnostic toolsAuto Testing ToolsTransponder KeyAlarms and SecurityAuto Locksmith Toolsinpa k+canxprog-mupa usb